Free Shipping 30Kpps Professional Laser Galvo Scanning system

$100.00

Availability:21
Brand: LH-LASER
Product Code: LH-PT30K

Available Options

Scanner

Add to Wish List

Compare

Tags: Free Shipping 30Kpps Professional Laser Galvo Scanning system

Description
Reviews (5)

30Kpps Galvo Scanning system for Laser light

Applying area:Laser Light scanning systems,3D printer systems.

1).No Dis And ILDA=Without LCD Display And No ILDA Interface

2).With Dis And ILDA=With LCD Display And ILDA Interface

Free Shipping /Бесплатная доставка /Livraison gratuite /Envío gratis /Kostenloser Versand

Product Description :

Standard package includes(same as the picture showing) :

2×Scanners
1x main board (show card)
2×Driver board
2×Mirrors
1×Scanner mount
1×power supply (PUS)
2×Cables driver to scanner
2×Cables driver to PUS
2×Cables driver to input signals
2x DB25 connector

SPECIFICATION:

Closed Loop Moving Magnet Scanner
Input resistance: 200K ohms, differential
Signal Input voltage:±5V
Input voltage requirements: +15V/1.0A,-15V/0.6A
Operating temperature range:0~50 degrees C
Optical angle:±20° max
Scanner speed:>15Kpps (30K ILDA test-pattern ,±20°optical)
Mirror dimensions WxL: 7mm*11mm*0.6mm(wide wave-length)
Board size:7.4cm (long) * 5.0cm (wide) * 2.5cm (high)

The Scanner was measured by an independent source and confirmed by the factory with PANGOLIN QM2000 card.Running at the desired output speed. Using the standard ILDA test pattern. Laboratory power supply at +/-15VDC,room temperature. Windows PC with Pangolin,12/30k ILDA test-frame full size. 7x11x0.6mm mirror was used during measuring period. The galvo is fixed in the standard mounts on an aluminium base plate, no forced cooling.

Deflection angle	Operating voltage	Speed@ Mirrors size
20º optical deflection	+/-15V	18Kpps @ 7110.6
15º optical deflection	+/-15V	25Kpps @ 7110.6
5º optical deflection	+/-15V	30Kpps @ 7110.6

Power input
XH-3 Connector pins	Description	Remark	Cable color
3	+VCC	+15V/1.0A	RED,24AWG
2	GND		BLACK,24AWG
1	-VEE	-15V/0.6A	WHITE,24AWG
Signal Input
3	Control signal Y+	-5V~+10V analog signal
2	S-GND	Ground
1	Control signal -	-5V~+10V analog signal

Potentiometer description:

IS Input scale (adjusted only in factory)
SG Servo gain (power of the feedback signal for internal PID controller
LFD Low frequency damping (correct overshoot)
HFD High frequency damping (correct undershoot)
LIN Zero offset (electrical offset of the driver, adjusted only in factory)
PS Position scale (increases or decrease input sensitivity of the computer, DO NOT change it)